Problem is I don’t know whether to get the 0.5mm or 1mm variant. I looked around and found the Alphacool Eisschicht self-adhering thermal pads 14 w/mK (17 too expensive) which I can buy at where I’m at. If you decide not to use one, you will not be penalized. If you’re looking for a company that can provide quality support. Four series, each with a different construction, accommodate most every demanding application. In areas where space between surfaces is uneven or varies and where surface textures are a concern regarding efficient thermal transfer, the supple consistency of the pads is excellent for filling air gaps and uneven surfaces. The thermal adhesive paste provided by Arctic creates pretty much a permanent bond between the PCB and the heatsink which I don’t want. The size of fujipoly extreme thermal pad is drastically different, so it needs to be known what fits comfortably on. Thermal Conductivity 2.3 Watt/mK - 3.0 Watt/mK. Meaning it’ll reveal all the VRAM/VRM and what not that normally are cooled by the front plate. I’ll have to remove the front plate of the 980 Ti to install the Accelero cooler. Specifically, I have an EVGA 980 Ti FTW ACX 2.0 4996 and an Arctic Accelero Xtreme III I want to slap on. I’m wondering when using self-adhesive thermal pads to stick tiny heatsinks on VRAM/VRM on a graphics card, does the thickness matter? Normally the thickness is determined by the gap between the two object squishing against each other, but since I’m just sticking heat sinks on the PCB, what thickness thermal pads should I use then? 0.5mm? 1mm? 1.5mm? First time posting here, please let me know if I did something wrong!
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |